 |
2 Pack Etch Primer-
Spraying/Brushing etch primer for use on non ferrous surfaces to inhibit corrosion and improve system adhesion. |
|
|
|
|
Cement Filler White-
A conventional knifing filler which is ideal for filling screw holes, bruises and seams above the waterline on timber craft. |
|
|
|
|
|
Coflex VT-
Vinyl Tar coating with excellent oil & diesel resistance, allied to abrasion resistance, flexibility and weather resistance. Coflex VT dries to a pleasant matt finish and exhibits good application properties. |
|
|
|
|
|
Engine Bay Paint-
Gloss finish for engine bays and other below deck areas. Will give heat resistance up to 150oC |
|
|
|
|
|
Fast Dry Sealer / Lacquer-
A high quality 1 pack n/c based satin finish sealer/lacquer for solid timbers and veneered MDF and particle board. |
|
|
|
|
|
Fibreglass Primer-
A specially formulated primer for application to polyester glass fibre, to provide adhesion to the surface and allow for additional finishing operations. |
|
|
|
|
|
|
|
|
|
One Pack Polyurethane Varnish-
A modern polyurethane varnish for bright work, sides and decks giving the extra hardness and protection of polyurethane without the need of a catalyst. May be applied over conventional stoppers or varnish. |
|
|
|
|
|
Plus Enamel Gloss Finishes-
Traditional high quality long oil alkyd enamel formulated to give excellent gloss, flow and weather resistance. Will give heat resistance up to 150 degrees Celsius |
|
|
|
|
|
Premium Protection-
High performance bitumen coating containing Gilsonite and synthetic resins. Exhibits a deep black gloss finish. Suitable for application to iron & steel and weathered masonry. |
|
|
|
|
|
Primer-Filler Grey-
Brushing and spraying primer-filler for use on pitted or uneven metal surfaces to give an even surface for fine finishing. |
|
|
|
|
|
Red Oxide/Zinc Phosphate Holding Coat-
Brushing and spraying holding coat for use over Rylard Zinc Phosphate Primer to increase corrosion protection and provide interim protection of newly built hulls during storage before final painting and fitting out. |
|
|
|
|
|
Rust Konverta-
Rust converting coating a water based chelating polymer designed for field application to rusted steel which has been hand or power cleaned or sand blasted. |
|
|
|
|
|
Rylaid Paint Conditioner-
Resin/solvent combination, containing Linseed Oil, formulated for addition to Rylard Plus Enamel to ensure correct flow and gloss are achieved when humidity/temperature conditions are not ideal. |
|
|
|
|
|
Rytex-
Versatile high performance bodied bitumen solution which dries to an attractive satin finish. |
|
|
|
|
|
Silvoline Aluminium Paint-
Bright Aluminium decorative coating for use on all exposed deck ironwork; stantions; davits etc. is also used as decorative finish in architectural applications, notably the lamp standards at Millennium Point, Birmingham. |
|
|
|
|
|
|
|
|
|
Standard Black-
Fast drying low viscosity coal tar varnish. Pleasant gloss appearance with better gloss retention than bitumen paints. Also exhibits resistance to oil & diesel. |
|
|
|
|
|
Terebine Driers-
A ready mixed drier combination that will assist the drying of Rylard products in poor weather conditions. |
|
|
|
|
|
Undercoat for Plus Enamel-
Traditional high quality long oil alkyd undercoat formulated to work as undercoat for Rylard Plus Enamel |
|
|
|
|
|
Water Tank Coating-
Bitumen Coating used to protect water tanks that have been previously treated with a bitumen coating. |
|
|
|
|
|
|
|
|
|
Yacht & Boat Varnish-
Traditional high quality yacht & boat varnish for bright work, sides and decks giving exceptionally hard elastic coating with a brilliant deep durable gloss. |
|
|
|
|
|